IKEA Lack Enclosure for 50x50 / 25x50 side panels
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
#IKEA Lack Enclosure#
##for 50x50cm / 25x50cm side panels##
###Why another design###
I liked IKEA Lack Enclosure for 3D printer, so I bought the IKEA tables and acrylic glass of standard dimensions 50x50cm and 25x50cm (4mm thickness), but I didn't find any model using exactly the same dimensions.
Therefor I've decided to create my own design.
###What's needed###
- **2x** IKEA Lack table
- **2x** 50x50cm 4mm panels (acrylic glass)
- **4x** 25x50cm 4mm panels (acrylic glass)
- **32x** M4 nut
- **32x** M4x16 bolt (for 4mm panels, M4x14 should also fit)
- *for 2mm panels M4x12 should be fine*
- **16x** 4x70 wood screw
- **16x** 4x40 wood screw (even shorter may be enough)
Optional:
- *M4 washers (optional, up to 48, I've used 16 for hinges)*
- *4-8 magnes*
- *4-8 magnet holders*
- *door handles*
- *filament guide*
*I've used four 20x10x3mm neodymium magnets and created design for holders and small handles (screws of handles are hitting magnets to keep the doors closed).*
https://www.thingiverse.com/thing:4707223
https://www.thingiverse.com/thing:4843989
You can add some drawers bellow the table:
https://www.thingiverse.com/thing:4845111
If you will build a second floor, you may need a bowden tube to get a filament from the top to the bottom box. I've created bowden clips for that purpose (usable for bowden printers getting filament from a side):
https://www.thingiverse.com/thing:4848118
###Models description###
There are two type…
