Back Horn Speaker V4.0
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
<img src="http://www.alpinehiking.eu/imgs/Speaker_Banner_640.jpg" alt="">
The full set of stereo components: https://www.thingiverse.com/guppyk/collections/my-stuff
<b>UPDATE 31Jan2021:</b> The new <b>2.1 Bluetooth amplifier</b> enclosure is online:
https://www.thingiverse.com/thing:4743037
<b>UPDATE 19Feb20:</b> The new <b>isobaric subwoofer</b> is now online:
https://www.thingiverse.com/thing:4765663
<h3>So finally here is Kissing the frog V4.0.</h3>
In my line of fully printable back-loaded horn speakers, this is (likely) going to be my last design (...just received some really interesting drivers for a DML system, so expect more experimental designs in the future xD ).
Strictly speaking this is not a back-loaded horn (at least not like V2.0). This one comes with a relatively (for a printed design) large main chamber (without corners or flat faces) and with a small horn attached to the back and opening up to the front.
Once again a complete redesign, looks super stylish, super cheap, no soldering, and is fully printable (and the entire body is still a single print which fits an 18x18 cm printer bed).
Here the <b>differences/characteristics</b> (as compared to V2.0/V3.0):
- Completely new design.
- This time the entire body is a single print.
- Went back to using a 3/3.3" driver (different driver but same size as the FRS8M used in V2.0).
- Ideally to be used as satellites in a 2.1 system.
- This time there is no room for an internal amplifier or Bluetooth receiver…
