Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a remix from https://www.thingiverse.com/thing:4226182
**2021/02/24**
Added a new version with Screw holders
* dupontHolderX3_v2_screws - 3 Connectors + 2 Screws
**2021/02/23**
Added a new version with Screw holders for 6mm screws (I have not tested to print so not 100% it will come out good
* dupontHolderX3_screws - 3 Connectors + 2 Screws
**UPDATE**
I've added a X1, X2 and X4 also, in case you need more or less connectors. They are all 28.15mm ones.
* dupontHolderX1_v5 - One connector
* dupontHolderX2_v5 - Two connectors
* dupontHolderX4_v5 - Four connectors
I wanted to keep the terminals connected since they are hanging but I have 3 and though it would be a good idea to keep 3 of them side by side.
The credit all goes to https://www.thingiverse.com/thing:4226182 I just used his step and copy and paste the connector 3 times :)
I'm uploading the .step also in case you want do have more than 3.
Note: I've just discovered that the two terminals I have together are actually 28.15mm so I'm uploading a V3 which is to accommodate for that size. The original from is smaller. This is the size of the terminals, so the inside of the connector.
Files:
* dupontHolderX3 - Original
* dupontHolderX3_v4 - 28.15mm
