Another Filament Spool Storage
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Yet another filament spool storage box but i wanted to make something that is customizable to different sizes of spools since I purchase my filaments from many different suppliers. This was designed in Fusion 360, so unfortunately it is not compatible with the thingiverse customizer which is based on openscad. However i have included the fusion 360 files here. If you import them into Fusion 360, you may customize it by changing the parameters menu. Almost all the measurements in this designed is based on parameters, so changing the numbers below will automatically update across the model.
Key parameters to look out for:
OuterDia - This is the outer diameter of the spool (model uploaded was set at 200mm)
InnerDia - This is the inner diameter of the spool (model uploaded was set at 89.80mm)
InnerHeight - This is the height of the spool measured from the inner sides (model uploaded was set at 55mm)
OuterHeight - This is the height of the spool measured from top to bottom (model uploaded was set at 60mm)
Thickness - This is the thickness of the individual compartment walls (2mm)
Boltdia - The diameter of the securing pins (model uploaded was set at 5mm)
Important!!! - When changing the parameters, make sure to change in logical order, example, if changing inner diameter to a value larger than the existing outer diameter, ensure to change the outer diameter first else will cause error in fusion 360.
Assembly process:
1. Print the 4 compartments
2. Print…
