The #NanoLongRange
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
__About__
- The #NanoLongRange basically a small FPV quadcopter designed around a single 18650 Lithium-Ion Battery
- The whole thing is still somewhat experimental and you shouldn't expect any sort of spectacular flight performance out of something that weighs 100g and runs on only 3V.
But it's still better than I expected and a lot of fun to cruise around and there is something really neat about just popping in a battery like on the remote of TV and having this thing fly for over ten minutes.
- This version is fully 3D printed apart from the battery tray to be a fun DIY project and not require souring any carbon parts.
- Youtube Video about the NanoLongRange: https://youtu.be/hvgukykBTNo
- Please note: This build isn't super easy because the components are tiny. A steady hand and minimum experience with soldering is required.
__Shopping List (Doesn't have to be these exact products, but they should be similar):__
- [Keystone HA 1X18650 SA battery tray](https://www.reichelt.de/batteriehalter-fuer-1-18650-zelle-ha-1x18650-sa-p141631.html) or this [knock-off from Aliexpress](https://de.aliexpress.com/item/33053366600.html?spm=a2g0o.productlist.0.0.7d2b5336QDeE3K&algo_pvid=8024633e-7520-4376-8e7f-fa9901758c41&algo_expid=8024633e-7520-4376-8e7f-fa9901758c41-6&btsid=2100bdca16147604846102832ebaea&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_)
*Important: You will need a good Battery holder, if possible with gold plated contacts. The cheap ones with a…
