LED strip clamp clip holder
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
### NEW models: Added a version for nails.
Usually a LED strip has some sort of adhesive tape on the backside. But somehow this tape, even when being supplied by a brand like 3M, won't stick for a long time. So I designed this small clamp to fixate a LED or RGB LED strip on any furniture you can drive a screw into.
A __second version__ is for glueing when you don't want to use screws and the old (and barely sticking) adhesive tape on your strip can't be fully removed.
A __third version__ is for using a nail. The hole is just big enough for a standard nail like found with IKEA furniture.
__For all versions you will find two models__, one with a *loose fit* (e.g. when the strip has to be pulled though the clamp) and on with a *very tight fit*.
### Size
I designed this for strips measuring around **3 x 10 mm**.
If like my designs, I would highly appreciate your support. [I always could use a cup of coffee](https://paypal.me/weirdcan) 😉.
