Customizable Square Pipe Cap (fusion360)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
--- Hi, I designed a more versatile rectangular cap, see that too. https://www.thingiverse.com/thing:4875215 ---
This is a square pipe cap. It can handle various pipe side.
Customization is done by changing the parameters of fusion360 file (.f3d).
Try this cap once.
Click here for the round pipe version. https://www.thingiverse.com/thing:4795549
[Features]
-Customizable
-Fixed firmly
-Hard to break even if squeezed strongly with a wrench
-Easy to remove from the pipe
-Easy to print(no support)
[Design point]
Designed so that when the bolt is tightened, the bolt is parallel to the pipe. This enabled stable tightening.
[Bolt/Nut type to use]
type: CAP bolt and Nut M3 - M6
bolt length: The recommended screw length is equal to or greater than the pipe diameter.
[Customizable parameters]
-pipe inner side (min:8mm at M3, max: no limit)
-Flange side (normally same as pipe outer side)
-Flange thickness
-Flange chamfer
-screw size (M3, M4 ,M5, M6)
*Detailed screw dimensions are set automatically.
Screws larger than M6 are also possible by manually setting the screw related parameters.*
[caution]
Since the input value of the parameter is not verified in the fusion360, an error may occur. For example if you use a too large bolt for a small inner side pipe, it may break.
If an error occurs, click the OK button in the parameter change window, and then click the undo button to return. This is because even if you try to change the parameters…
