The Heist - Puzzle Box
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Checkout the IMPROVED REMIX https://www.thingiverse.com/thing:5140061
Summary
Hilarious YouTube Homemade Commercial: (April 30, 2021)
https://www.youtube.com/watch?v=vSHd0pNM9u0
Assembly Instructional Video:
https://www.youtube.com/watch?v=hI5dVq_0oe4&lc=Ugzpjna8nFBcAoASS8Z4AaABAg
THE HEIST: SOLVED Video:
https://www.youtube.com/watch?v=Is-BnVotj5U
The Heist - Puzzle Box is an original design by Leisure Luke. It's a 23 Piece Puzzle Box that is SUPER EASY TO PRINT! No Supports Needed. Print it in PLA! Parts without squiggly springs can be PETG or PLA. Very little plastic used!
0.1mm tolerance for all non-sliding parts.
0.2mm tolerance for sliding parts
Verified to Print well at 100% and 150% sizes (0.4mm nozzle, 0.2mm layer height)
My Colors for each .stl model
Gold: Gold, Tool
Blue: Diamond_T7
White: Bolt, Barrel, BarrelSpring, BarrelPinV2
Marble: HeistLid, UpperBoltClamp, LowerBoltClamp, SafeBar, Spacer, Heist_Base_SafeCo_Pv5, Dial
Black: VaultDoor, Clips_Print_3_of_These, ClipSpring
Red: Pins_2_and_3, Pin_1, PinClip, DoorButton
You should be able to straight from the PRINT bed to ASSEMBLY! No External parts needed - no metal springs, no bearings, no magnets, no electronics, NO GLUE, NO SANDING... you get the idea!
As tested - 100% PLA 3D Printed!
Print all 20 pieces and 3 clips and they'll fit together pretty easily. Watch the YouTube video, I use a pliers for some parts of the assembly, especially at 100% size.
Again, see the…
