Full Size Anatomically-Correct 18-Piece Magnetic Human Skull Model
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This human skull model can be used for learning anatomy or just freaking out your friends. See here for assembly video: https://youtu.be/dm0RT-1eFFc
See here for stable download: https://thangs.com/mythangs/file/60036
To assemble with magnets, you will need:
• 66 of 1/8” x 1/16” cylindrical
• 38 of 1/4” x 1/8” cylindrical
www.kjmagnetics.com is a good source of magnets.
Files are provided in anatomical orientation. You will need to reorient and prepare them according to your preferences, equipment, and skill level. Here are some considerations:
• Orient outer surfaces upwards so that the surfaces in contact with support structures are less visible in the final model.
• As much as possible, avoid orienting the magnetic anchors downwards. There are some situations in which this is unavoidable. These can be cleaned up post-print.
Here are considerations for assembly:
• Before inserting magnets, clean out the magnet anchors with a 1/8” or 1/4” drill bit to remove any imperfections, allowing the magnets to sit properly.
• Ensure that you insert magnets with polarity oriented to allow proper connection of bones.
• You may need to use glue to secure some of the magnets in place. CA glue works well.
Every attempt has been made to maintain anatomical correctness; however, the following small modifications were necessary to optimize the files for 3D printing:
• The nasal bones, lacrimal bones and upper teeth are fused to ipsilateral maxilla. Lower teeth are…
