Helmet Wall Stand
by Counter_Productions · from Thingiverse
Free to print
♥ 1,451 likes
↓ 9,112 downloads
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I designed this stand for my racing helmet. It attaches to the wall with 2 wood screws into a stud.
I used 6 sets of M4x20mm socket head screws with nuts and washers to hold everything together.
My Print Infill and Layer Settings:
0.4mm Nozzle with 0.32 Layer Height
BASE:
Infill - Grid 50%
Walls - 5
Top and Bottom Layers - 5
Support - No
ARMS:
Infill - Grid 50%
Walls - 5
Top and Bottom Layers - 4
Support - Yes (Needs support on one end)
TOP HAT:
Infill - Grid 20%
Walls - 3
Top Layers - 3
Bottom Layer - 6 (Make sure tab with holes is completely solid)
Support - No
