Fully Customizable Hinge

Our most popular free designs include our fully customizable craft and DIY objects so, today, we are bringing you a more ambitious design in that category; a fully customizable, print-in-place hinge.

This design is **_completely free_** and shared under a permissive license. Your [support](https://codeandmake.com/support) is hugely appreciated.

Did you know?
-------------------

Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects:

https://codeandmake.com/premium

OpenSCAD Customizer Options
---------------------------

This design has the following Customizer options:

### General

* `Material_Thickness` - Thickness of the material
* `Gap_Percent` - Amount of material to remove from gap points

### Leaves

* `Leaf_Length` - Length of each leaf (X axis)
* `Leaf_Width` - Width of each leaf (Y axis)

### Knuckles

* `Knuckles` - Total number of knuckles
* `Large_Knuckle_Recesses` - Use if you need up to 270 degrees of rotation

### Screws

* `Screw_Holes_Per_Leaf` - Number of screw holes per leaf
* `Screw_Hole_Diameter` - The diameter of the screw hole
* `Screw_Head_Diameter` - The diameter of the screw head
* `Screw_Head_Countersink_Angle` - Screw countersink angle (82 and 90 are common)

### Preview Only

* `Part` - Part(s) to show in preview mode
* `Sleeve_Leaf_Rotation` - Rotation of sleeve leaf in preview mode

Design Considerations
---------------------

This is…