Printer Warning Sign - Do Not Touch
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A sticker was my inspiration to design this funny warning sign for my 3D Printer.
Change filament color from black to white after printing to the layer height of 1mm to make the embossed areas visible.
### Which one should I print?
I recommend the *INVERTED* files as the texts are embossed. This way it requires less material and time to print.
If your printer doesn't handle fine structures well (e.g. stringing is a problem), try the *enhanced* files. Here the texts are debossed. On some printers this may produce better results but on some printers worse.
The most flat design are the normal ones where the WARNING area is not raised. Here a third swap to red filament is not possible with single extrusion.
Also for each design there exists one design for normal (cartesian) printers or for delta printers. Those designs are available in both, English and German.
### How to print colors:
If you don't want to paint the print, you can print the sign in three steps by changing the filament after the height of 1mm.
On the inverted part start with white filament, then change to black and finally change to red filament.
On the enhanced files start with black filament, then change to black and finally print in red.
The "easy" part only supports a black basis and a single swap to white filament.
If you have any suggestions or problems please leave a comment. I was able to improve these files multiple times through the thoughts of this great community. Thank…
