Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Hi everyone
I want to share my project I designed for my daughter.
This help you to create nice stamp on paper or post cards.
You can replace die and make different stamp. There are a few types of shapes: hear, star, smile etc but if you want create some custom stamp please use Stamp_Template.stl.
It was designed to print with 0.2mm and this is important to get nice looking effect.
Effect depend on paper (can be a photo, postcard or even aluminium foil) thickness and force you use to make the stamp. Try with different papers but best result you get with 0.15 - 0.20 mm.
If you want to create onw stamp I recommend to use 0.6mm die depth and 0.2 or 0.4mm chamfer on edges. In Fusion 360 I used 0.2mm 0.6mm chamfer for "tenon" part and 0.4mm 0.6mm for "mortise" part.
Printing does not require any support. Only for Bold it is good to use small brim. After printing the bold smooth surface with a sand paper or sharp knife.
It is not required to print Stamp_Case_Holder.stl but it helps to keep all parts in one place.
Thanks
UPDATE 1
PaperStamp_v5_Shared v2.f3d added - Fusion 360 project source. So far without arms and cases
UPDATE 2
PaperStamp_v8_BaseShare.f3d added - Fusion 360 project with Stamp_Top and Stamp_Base elements. Objects are fully parameterized so you can simply change stamp size, arm length and width. I do not guarantee that all dimensions are properly constrained :)
