**THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES**
**NOTE: I NO LONGER USE THINGIVERSE - FOR SUPPORT, PLEASE CONTACT ME VIA PRINTABLES: https://www.printables.com/social/242618-magnavis/about**
-----------------------------------------
@Magnavis_ - Twitter & Instagram
www.magnavis.co.uk
---------------------------------------------
The Sword of Gryffindor.
This has been test printed on an Elegoo Mars, aswell as a Peopoly Phenom with great results!
As with many of my files, there are some variation pieces.
The default version is split in such a way that you can print it entirely on an Elegoo Mars (or similar sized resin printer), or - in regards to the blade pieces - an FDM machine with a lower Z-height (Such as the Wanhao i3 Plus, which I use). I would recommend these pieces if you wanted to print the entire thing with FDM, as it provides clean, flat edges.
I've also provided some pre-hollowed models for the small format version. Simply use the version with -HOLLOWED at the end, hit slice, add some drainage holes, and you're good to go!
There are larger blade pieces (split into 3 instead of 6), with bigger FDM machines in mind, and also a one piece hilt, with larger resin printers in mind. These can be found in a ZIP file called Sword-of-Gryffindor-Large-Format-Pieces.zip.
There is also a one piece sword for those with belt printers. This has been split vertically into…
