Minecraft Ore Keycaps
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
These are some Minecraft ore keycaps that are based on the new textures for 1.17+.
### Final Update
All the files have now been uploaded, including an f3d file for those who want to do a remix. (It's my first time modelling with fusion 360 so please excuse the mess)The v1 files have been compiled into a zip file.
### Printing Instructions
**v1**: 1-part print. Print as is for full-block size or scale down height to 11.4mm (uniform scaling off) for slab size.
**v2**: 2-part print. Find the files for the size of your choice. Print outer part with an opaque filament. Print the inner layer with translucent or white filament for better glow effect or a color of your choice to represent the ore.
Check out the print settings section for more info.
### Compatibility
These are designed and tested to fit on outemu switches so any cherry and cherry clones should fit as well. You may refer to the chart (look for the stem type) on this [link](https://mechanicalkeyboard.com/switches/ "link") to check out the compatibility of your switches.
### Tips
- These are printable with 0.4 nozzle, but the keycaps shown in the photos are printed with 0.2 nozzle. I tried printing with 0.4 but I just wasn't satisfied with the result.
- If the stem of your printed keycaps don't fit the switch or are too loose, you can try adjusting the hole horizontal expansion setting in Cura to fine tune the hole sizes.
- For v2, scaling the inner layer to 99% and setting hole horizontal…
