Mechanical Flux Dispenser

<h2>Mechanical Flux Dispenser</h2><div><font size="2">The <a href="https://go.like-it.link/gYNQo" target="_blank" rel="noopener noreferrer">previous version of the dispenser</a> turned out to be quite a popular tool, but in the process of work in recent years, claims to it have accumulated :) Or rather, to the work process. For example, solder paste needs to be stored in the refrigerator, and I also pack it mainly into small syringes. And you do not need a lot of solder paste when working with small soldering. Yes, and it is not possible to push through a large amount of paste from a large syringe normally. So this time I made a 5CC syringe dispenser.</font><br><br></div><div><font size="2">In principle, this model was not planned at all, since I am now working on an electric dispenser, but suddenly I realized that such a design also has a place to be. Moreover, it did not take much time. YOU will learn about the electric flux and paste dispenser in due time, when I finish working on it, and there is no battery yet, there is more on the way ...</font><br><br></div><div><img src="https://like-it.link/02234/mechanical-flux-dispenser-1.jpg"></div><div><font size="2">As you can already see that there are almost no printed parts, well, a bit at all, since I took a very reliable syringe adapter for a pneumatic dispenser as a basis. By the way, you can't work with a pneumatic dispenser for little things either, while pumping up the compressor, while adjusting the flow, etc. Well,…