Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
### Similar to split flap clocks but each flap is single sided and erects at the top of the clock.
Download all files from the following link,
https://www.thingiverse.com/thing:5140134/zip
Note : this clock is relatively difficult to make.
This clock can be printed out with common 3D printers (largest part size is within 20cm x 20cm). Dimension (without flaps) : H151mm x W195mm x D157mm
Operation (time adjustment)
- Wheels of hour and tens of minute can be advanced manually.
- By pressing reset button of Arduino, the clock advances 1 minute instantly.
- To adjust the fine position of the 1st digit of minute, reset the Arduino while the motor is working.
