pocket hole jig (2x4 joint)
by kumahachi · from Thingiverse
Free to print
♥ 2,346 likes
↓ 9,779 downloads
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A jig that supports drilling for connecting 2x4 wood.
I made two according to the width (38 mm and 89 mm) which is the standard of 2x4.
The drill bit has a hole size set to 8.1 mm to use 8 mm.
The angle of the hole is 25 degrees
The translation used Google.
