Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Send a mail at [email protected] to purchase the kit for 45$ it includes a build guide, schematics, code , and help via email
Fill out this form with some basic info and get a discount of 10%
https://docs.google.com/forms/d/e/1FAIpQLSecsFubnVS1qn2xZ8caPsTR_iNMZ7qd9-S2iIqk6iiDY4Bs-Q/viewform?usp=sf_link
The purpose of making this was to eliminate remembering all the important shortcuts and complex key combinations. Each shortcut can be mapped to an individual key and can be keycaps with a single keystroke.
It uses an Arduino pro micro as the brain 29 mechanical switches and some basic parts like an
Print instructions
Print the keycaps with 0.12mm layer height. We can print you everything else at 0.2 mm.
Build Instructions
Print out all parts which includes the e, base, and keycaps a total of 34 (cover for the rotary encoder and knob is optional).
The faceplate and keycaps need some cleanup.
Insert the switches into the faceplate and wire them up like the schematic. You can also add the diodes using single strand wire helps keep everything clean.
Solder everything to the Arduino (I have used male and female header pins for easy access) and stick the Arduino to the bottom with double-sided tape make sure to keep the wires small so that everything fits.
Connect the ws2812b led strip to the Arduino as shown in the schematic and stick the strip at the bottom
If you are using the rotary encoder, solder the wires to the pin header and…
