Floating Shelf (Updated v2)

New Additions (v2.1) - See below for details

Floating wall shelf

I have updated the floating shelf to version 2 based on suggestions in the comments.
- Wall mount posts are rectangle and the same width as the width of the bracket bottom
- Printing on the side instead of upright increases the strength of the posts

Dimentions
15mm x 90mm x 70mm
15mm x 90mm x 180mm
15mm x 90mm x 120mm

<b>*See "Support" below for direct download to avoid Tip PopUp window*</b>

If you would like this in a larger size, please let me know, I am happy to help.

More Designs Here:
https://www.thingiverse.com/davidgunzenhauser/designs


Parts:

V2.1
1) v2.1-Floating Shelf 120 - Shelf
2) v2.1-Floating Shelf 120 - Shelf Rounded
3) v2.1-Floating Shelf 120 - Bracket

With this version I have added a new size, and an option for rounded corners.
Note, the bracket will work for both of the v2.1 prints

v2
1) Floating-Shelf V2
2) Floating-Shelf V2-Wall Mount
3) Floating-Shelf V2 180mm wide
4) Floating-Shelf V2 Wall Mount 180mm wide


v1
1) FloatingShelf.stl
This is the actual shelf. It simply slides onto the wall mount. No screws necessary
2) FloatingShelf.wallmount.stl
This is the wall mount for the shelf. This will be mounted to the wall and the shelf will slide on

2 Screws are required 3.5mm x 30mm
2 wall mount anchors for screws

Rafts:
No

Supports:
No

Printer:
Ender 3 V2

Infill:
15% for Shelf
100% for wall mount - It is not necessary…