Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Update 18/11/2022
Thank you all for sharing, printing and enjoying this humble print.
As I found that many removed the logo, I took it off and uploaded a bookmark. I also added a longest version, for those that need something over 10 cm as a bookmark.
Regarding the claws, I modified the clearance for those that couldn't make them fit. The space should be enough to make them fit and may even need a bit of glue.
Finally, I included a whole design, for those that prefer to print it in one piece. Maybe you have to print it upside down, to use the least amount of support.
Update: 12/04/2022
I added a new part "Claws-corrected". Thanks to PacmansRage for letting me know that the claws were inverted. I left the older version as it still looks cool.
--------------------------------------
Update: 28/02/2022
I added a new part "Bookmark longer" as some comments suggested having a longer version.
--------------------------------------
This is a creepy bookmark meant to make the book more thrilling. It can be scaled up to be set among books too.
I tested to add a clip to it, so that it stays put, but given the effect I wanted to achieve, I had to drop it. So it is simply a page marker, thin to avoid being bulky, but wide enough to be resistant.
The claws are small, meant to fit a regular book, rather than a big volume. They will be too long for some short books, so I made one hand pointing slightly upwards to help overcome this issue.
I printed mine in dark…
