Watering Can - 4 Sizes, Succulents, Cacti, Greenhouse
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Spring (or was it winter?) is coming and I needed some stylish and easy to print watering cans for indoor (bonsai, succulents, cacti ...) and outdoor (greenhouse ...) use. This one comes in 4 flavors: 125 (5"), 155 (6"), 170 (6.7"), and 185 mm (7.3") height.
- I print mine using this <a href="https://amzn.to/4iP4dmN">cheap, strong, and easy to print Carbon Fiber PLA </a>, which looks great and is very durable. However, PETG or ABS will also work.
- This should be an extremely simple print. Print at 0.2 mm resolution and 40+% infill. Designed so you won't need any supports. Test to make sure your print is waterproof before use.
- I use some cheap, clear epoxy resin (approx. US $5) to make my prints 100% waterproof: <a href="https://amzn.to/499p3Y4">Epoxy Resin</a>. Apply with a long brush or simply rinse the inside of the watering can.
<b>HOPE YOU LIKE IT AND IF YOU LIKE IT PLEASE LIKE IT!</b>
Enjoy!
.
PS.: This post may contain affiliate links and I may I get commissions for purchases made through links. You can support me by simply ordering through these links (and it won't cost you any extra).
