Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
###Desk Drawers with Drawer Case for under table mount.
Ideal for Desks with adjustable height.
Thanks to @pixi2012 for the original.
I modified the case so that less filament is needed and it's possible to drive screws through the case.
I have used 3 flat screws and one with a big head for each drawer (see attached picture).
Use the big head screw for the front left hole and the drawers won't fall out of the case.
measures (all in mm):
case: 190 x 190 x 35
drawers: 185 x 185 x 29
handle: 40 x 15
@pixi2012's design is too large for my ender-3 bed. (this remix has orignal size)
If you have the same problem, just scale the files down with your slicer.
I have used 97% of the size for the drawer case
and 96% of the size for the drawers.
###Print settings:
Resolution: 0.2
Infill: 25%
Support for Drawers (handle only)
No support for Case!
### other: Hidden Drawer
>>>>https://www.thingiverse.com/thing:5713894
### for xmas:
>>>>https://www.thingiverse.com/thing:5653518
