Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
#### [>> DOWNLOAD ALL FILES <<](https://www.thingiverse.com/thing:5372144/zip)
## Filament Cutter - 45 Degrees
**I first uploaded this filament cutter to PrusaPrinters (Printables.com) at the end of October 2021.
(Link: https://www.printables.com/model/84172)**
This filament cutter cuts filament with a diameter of 1.75 mm at a 45 degree angle. The 3D model of the cutter was created with Fusion 360. Printing time is less than 50 minutes and assembly takes 1-2 minutes.
The following materials are needed to assemble the (original) **M2.5 version**:
- 2x M2.5 cylinder head screws (length: approx. 5 mm)
- 2x M2.5 hexagon nuts
- 2x M2.5 washer (outer diameter: 5-6 mm)
- Snap blade (blade width: 9 mm, 3 parts/segments)
For the assembly of the **M3 version with nuts**, the following materials are needed:
- 2x M3 cylinder head screws (length: approx. 4 mm)
- 2x M3 hexagon nuts
- Snap blade (blade width: 9 mm, 3 parts/segments)
For the assembly of the **M3 version without nuts**, the following materials are needed:
- 2x M3 cylinder head screws (length: approx. 4 mm)
- Snap blade (blade width: 9 mm, 3 parts/segments)
**Tips:**
- If you print the filament cutter with supports, then the supports (in the cutting slot) can be loosened and removed very well and easily with the cutting blade when assembled.
- For left-handers, a mirrored version would probably be a bit more advantageous. A mirroring of the stl file (along the x axis) can be realized very…
