EDC Container Box Capsule + O Ring

--– Printed O-Rings (TPU)---

I do not recommend using self-printed TPU O-rings. In my tests, these performed worse than original ones. But they are still better than no O-Ring. But only if you use very very soft TPU! I have 2 versions. One O-Ring to put into the lid and one for the outer O-Ring version. (Keeps the threads dry too). Don´t combine both O-Rings because that might reduce the sealing capability!

--- Small hint in case of fitting problems ---

Some have problems with the lid being too small. This can happen if the printer is not set up well and larger tolerances are required. You can separate the individual parts of the .stl in your slicer and enlarge the cover a little to solve the problem.
(Google "your slicer name" + "separate objects" or "splitting model")

--The POWER of Scale!--

You may scale the Container to your needs! For example bigger for more stuff or smaller to transport some pills, ear protection or sth. else on your keychain. try it out yourself! But keep in mind that the container needs to stay round and the needed O-rings will change their size too (if you print a version with O-Rings). Also watch the printed perimeters in your slicer! (at least 2 will be needed to giv it protection vs. water!)


But don´t worry too much! Simply test it out yourself!


Inner Volumes as base to scale the container:

Large: 69 mm hight x 19 mm diameter.

Small: 36 mm hight x 19 mm…