Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This incredibly tiny fidget uses less than 1.5m of filament.
<iframe width="640" height="360" src="https://www.youtube.com/embed/1CqIXvbk_vw" frameborder="0" allowfullscreen="true">https://youtu.be/1CqIXvbk_vw </iframe>
https://youtu.be/1CqIXvbk_vw
It's available in the following versions:
**Large magnets**
*6x3mm cylinder magnets*
Strongest and most reliable click.
**Small magnets**
*3x3mm cylinder magnets*
Soft click with an optional middle setting.
**No magnets**
*No hardware required*
Depending on your printer's calibration and the filament you use, this will provide a click of variable stiffness.
**No magnets V2**
*No hardware required, stays clicky longer*
Depending on your printer's calibration and the filament you use, this will provide a click of variable stiffness.
**8x3mm magnets**
*8x3mm cylinder magnets*
**10x3mm magnets**
*10x3mm cylinder magnets*
