Ender 3 S1 Pro Tray Insert

I was unable to find and Ender 3 S1 Pro Tray Insert anywhere so I decided to take a deep dive and dabble in some Fusion 360 3D modelling learning a lot in the process.

This is my first 3D model from scratch, my first design that I'm sharing with the world, and I think it came out awesome.
I hope you all enjoy this cool add-on for your S1 Pro. Have Fun!

PRINTING INFO

Nozzle: 0.4 mm
Layer Height/Resolution: 0.20 mm

Perimeters/Vertical Shells: 4

Hollow Infill: 20% Honeycomb/Hex

Horizontal Shells:
Bottom Surfaces = 4
Top Surfaces = 4
Tray bottoms are total of 8 layers thick solid infill = 1.6mm

Perimeter Speed: 50 mm/s
External perimeter speed: 40 mm/s
Solid Infill speed: 50 mm/s
Top infill speed: 30 mm/s
Support material speed: 50 mm/s

1st Layer Extruder Temp: 215 C
1st Layer Bed Temp: 70 C
1st Layer Cooling: 0%

2+ Layer Extruder Temp: 210 C
2+ Layer Bed Temp: 65C
2+ Layer Cooling: 100%

Z-Hop: 0.1 mm
Wipe: No

Supports:
Slicer Auto Generated
ONLY on left side under the "Shelf" and the small "Dimple" in the bottom.
No supports under the angled side profiles, I tried and the angled support messed up my first print

Extras:
Ensure your bed is super level with a recent leveling probe mesh performed ON A HOT BED
(Bed can warp slightly when hot so you want to run the level program while its "warped").

Ensure your start G-Code is calling out the saved bed level mesh with (M420 S1) placed after the (G28) command.…