Cosplay Arm Bracer v1 (Djeeta Granblue Fantasy)

Update : Added .obj and .fbx models of the 0.55mm version, also a no-thickness version if you want to modify how thick it is. I'll describe further below how to use that model. (Please don't try to print the no-thickness directly, it won't work.)

A cosplay armor/arm bracer in 2 parts. Need to be scaled to whatever size your arm is. This was the size that fit my slightly bigger arms.
Also might be in an extremely tiny or large scale, might have to scale it up by 10000% or something. Blender and Cura did not want to co-operate on this.

Matching hand-armor models can be found here: https://www.thingiverse.com/thing:5448376

<h4> IMPORTANT: This was designed for Vase Mode (Spiralize Outer Contour in Cura) with a <b>0.5 nozzle and 0.55mm line width.</b></h4>
<p> HOWEVER! It should be printable with both 0.6 and 0.4 nozzles, but you should change the line width to 0.55 or somewhere between 0.5-0.6 and adjust flow accordingly. If you don't print in vase mode, please take note of your wall-line width settings.
I used 0.2 and 0.24 layer height because I was lazy and wanted them done quickly.
I made a 0.44 model too with a slightly thinner wall, but I cannot change to a 0.4 nozzle at the moment to try if it works, so print it at your own risk. </p>
<p> </p>


Based on Djeeta from Granblue Fantasy and her arm bracers in GBVS. Made it for my cosplay of her for NärCon 2022 in Sweden.
Should work for other cosplays aswell, or just larping or costumes. Also i don't…