Printable airsoft AR-15 gen4 (V4, aka EVO)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
<h3><p><font color=#cb680b>Basically a done project, print an enjoy, but be sure you have at least basic understanding of how airsoft ar15s are put together before you start.</font></p></h3>
* Upd 12.06.2024 added simplified stock files, please print those as the old one was overcomplicated for no reason.
You will need 2 m3 heat inserts and 2 m3x10 or m3x15 normal screws.
If life is tough you can jam there an m3 nut I guess.
* 26.11.2024 image with most needed screws and their placements
<h2><p><font color=#da2d07>Info for new people. This is an AEG body kit, you need to buy internals, no you better not try to print v2 gearbox and hopup</font></p></h2>
Newest gen of my printable ar thing. Goal this time around is to achieve the most strength possible and to make printing outer barrel adequate. In other words to make printable airsoft ar15 looking thing that can withstand moderate amount of abuse you'd expect normal airsoft gun will (and then some).
And I happily conclude that that goal is indeed reached. The only weak part this project has is an adjustable stock locking pin, which system I might revise at some point (normal buffer tubes are compatible)
This is a set of files to get a body of an M4 looking thing designed to be printed in it's entirety. All elements except screws, nuts and springs, and 12mm tube in case you want it m16 length wise.
This means you buy internals. For this you need normal rear wired V2 gearbox (just buy cyma unless you have a better idea, will…
