Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Wile E. Coyote, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros.
He is a cunning, devious and constantly hungry coyote repeatedly attempting to catch the Road Runner. Instead of using his animal instincts, the coyote uses absurdly complex contraptions to try to catch his prey, which comically backfire, with the coyote often getting injured in slapstick fashion.
No supports are required. One piece contains built-in supports and two other parts contain built-in braces. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports (see notes below). If you have the proper filament colors, no painting is needed.
The assembled model is 175mm tall, 315mm long and is mostly in proportion to my previously released Looney Tunes models.
Enjoy!
...........................................................................................................
Special shoutout to maker Benoît Lussier for providing QA printing, helping me work through my mistakes and quality feedback.
...........................................................................................................
**Print Instructions:**
Supports: No
Resolution: .2mm
Infill: 10% (infill for body_front should be higher for strength in the arm, 20%)
Notes:**
Refer to the notes below for a few helpful printing and assembly…
