Missile Pod-style Battery Holder AA/AAA /3Hatch Type

View only ♥ 2,991 likes ↓ 4,547 downloads

Click here for 2 hatch type / 4 batteries included
https://www.thingiverse.com/thing:5572757

Missile pod style AA and AAA battery holders.
I made two types for AA and AAA.

The AAA battery type and commercial license are currently being prepared for sale.

This file is provided as a free sample for personal, non-commercial use only.
Please do not re-upload this file to other platforms.

Feel free to support me at:
<a href="https://buymeacoffee.com/andcraft3d/"target="_blank"><img src="https://cdn.thingiverse.com/assets/da/e0/8b/91/43/bmc-button-c.png"></a>

Please refer to the stl data and video of "others-assembly_reference" for assembly and usage.

*For 18650 batteries (output unconfirmed)
When the scale of "aax3-pod case-body" and "aax3-pod case-cowl" is multiplied by 1.286 when outputting, it becomes the size of 18650 battery.

-------------------------------------------------
Reference for print settings

Recommended layer height 0.2mm.
Shell 3loops
Infill 10%
Top thickness 1mm
Bottom thickness 1.5mm

All data can be 3D printed without support on FDM 3D printers.
Use a nipper to cut the small triangular support on the part where the cowl of the "pod case-body" attaches.
There is a 0.2mm gap in the height direction of the small triangular support of the "pod case-body".

*supplement
Depending on the conditions of the printer, slicer settings, filament, etc., the hatch may be hard to open and close after printing.
Be careful when opening and closing the hatch for the…