Jellyfish Swimming - Mechanical Interactive Art

Have this mesmerizing print on your desk or in your living room as a novelty decoration and a conversation piece. No glue or extra parts needed.

---

#### Printing settings
All files are in STL to print without any support and already in the best orientation to print.
Most parts can be printed with your standard 0.2mm layer config. In the pictures, they were printed using 3 walls and the lightning infill for almost everything.

The tentacles can be printed in vase/spiral mode, to avoid the seam line, they have a custom easy-to-remove brim.

**Parts grouped by the colors used in the pictures:**

**Pink (or your jellyfish chosen color):**
- Dome.stl
- DomeRing.stl
- CenterGear.stl
- GearsBase.stl
- 8 x ExternalGear.stl
- 8 x ExternalTentacle.stl (vase/spiralmode)
- 4 x InternalGear.stl
- 4 x InternalTentacle.stl (vase/spiralmode)
- Axle.stl - can be clear

**Clear:**
- DomeUnder.stl

**Blue (or your base chosen color):**
- Base.stl
- BaseLid.stl
- CrankHandle.stl

**Silver:**
- CrankAxle.stl

**Random color (these parts stay hidden):**
- CrankAxleGear.stl
- CrankLock.stl
- AxleBaseGear.stl

**Assembling**
https://youtu.be/fBVhXHgbrTI
<iframe width="560" height="315" src="https://www.youtube.com/embed/fBVhXHgbrTI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

**Assembling Tips **
- Check all the connections, screwing…