Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Road Runner, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros.
Road Runner, also known as Beep Beep, speaks only with a signature "beep beep" (sometimes misheard as "meep-meep") noise and an occasional "popping-cork" tongue noise. His nemesis, Wile E. Coyote, utilizes absurdly complex gizmos and elaborate plans to try to catch him, but fails every time.
No supports are required. One piece contains built-in supports and one piece contains built-in braces. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports (see notes below). If you have the proper filament colors, no painting is needed.
The assembled model is 155mm tall, 280mm long, and is in proportion to my previously released Wile E. Coyote model.
Enjoy!
...........................................................................................................
Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback.
...........................................................................................................
**Print Instructions:**
Supports: No
Resolution: .2mm
Infill: 10% (see optional special considerations for the dust)
Notes:**
Refer to the notes below for a few helpful printing and assembly…
