Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
***Toothbrush Holder Tooth***
A toothbrush holder shaped like a tooth **remixed to keep the toothbrushes upright**. It has a modified cavity that has a flat bottom instead of a paraboloid bottom and has 4 walled off compartments. There are now three versions available to download: one with a hole at the bottom, one without the hole, and one that is a shell with no dividing walls.
2022-12-05 update: I added a 3rd version where the cavity is the same shape as the tooth and goes all the way down to the bottom of the model. I made this version because I had noticed in the comments of the remix source that some people complained that the cavity wasn't deep enough and their toothbrushes fell out. My original remix should solve that problem too and I prefer it, but some people might not like the retaining walls so this is an alternate solution to the problem.
2023-01-26 update: I added two 3-walled versions: one with a drainage hole and one without the hole. These versions could be used to hold a tube of toothpaste along with a couple toothbrushes, but you might want the 2mm shell version instead if you want the tooth to hold some toothpaste.
With the updates, **there are now 5 versions available**:
* flat bottomed cylindrical cavity, 4 walls, with drainage hole
* flat bottomed cylindrical cavity, 4 walls, no hole
* flat bottomed cylindrical cavity, 3 walls, with drainage hole
* flat bottomed cylindrical cavity, 3 walls, no hole
* 2 mm shell with deeper…
