Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Have you ever zip-tied a cable into a looped bundle, but then later realized you wanted to undo a few loops because you didn't tie it to the right length?
This part allows you to do that. This one fits a Cat5 UTP cable snugly. The default cord thickness is 5.62mm
20mm prongs: taper at 2.50 deg.
30mm prongs: taper at 2.00 deg.
40mm prongs: taper at 1.75 deg.
If you need to wrap a different cord, open the link to the Onshape document: there are parameters for cord thickness, prong length, depth, prong_taper_angle, etc.
