Battery Dispenser- AAA - AA - 9V
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
All credits to Bradk3 for the idea.
Battery Dispenser for AAA, AA and 9V batteries, 152,5x127x58mm
I did not like the screw-holes on the side of the original Battery holder, so I decided to redesign the battery holder. The screw-holes are now hidden on the inside.
I had to print the dispencer twice:
- In the first design, my finger could not grip the battery to shove it out.
- I have enlarged the space in the bottom and in the front. The opening is now 1/2 of the length of the battery -4mm for stability. Now it works just fine.
I have added radii to improve stiffness, strength and printability. It can be printed without support except for the Skadis design. Print it straight up, the bottom touching the printbed.
- Update 6-01-2023 Upon request: Added a design for the Ikea Skadis board. John, thanks for testing!
- Update 13-01-2023 Upon request: Added a design with AA an AAA alone. (9V removed) TaLun, thanks for testing and the nice pictures!
- Update 20-01-2023 Upon request: Added a small design. 1xAAA, 2xAA and 1x9V. Heigth reduced to 123mm.
- Update 27-01-2023 Upon request: Added a smaller design without 9V: 2xAAA 3xAA with screw holes and Ikea Skadis hooks.
