Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
<h2>Filament Spool Stand<br><br></h2><div><font size="2">With the advent of a new printer, which I assembled last summer, the question arose about the location of the coil. The standard place of the coil is behind the printer, but this gave me of inconveniences with access. And since my printer is under the shelf, I decided to feed through the shelf itself.</font><br><br></div><div><img src="https://like-it.link/02253/filament-spol-stand-1.jpg">/<br><br></div><div><font size="2">The main details of the stand are cut out of plexiglass by a laser, which I advise you if you want to repeat. Therefore, the archive also has drawing in DXF format. But you can print, for example, from </font>PLA<font size="2">, you also need to take into mind that a load of 1 kg requires filling that is not the most loose.<br></font><br></div><div><font size="2">I also added a filter to the hole in the shelf, inside of which there is a microporous foam rubber cut by a laser. This arrangement also made it possible to organize a kind of passive thermal chamber, hanging on magnets with a curtain made of agricultural fabric.</font><br><br></div><div><img src="https://like-it.link/02253/filament-spol-stand-2.jpg"><br><br></div><div><img src="https://like-it.link/02253/filament-spol-stand-3.jpg"><br><br></div><div><img src="https://like-it.link/02253/filament-spol-stand-4.jpg"><br><br></div><div><img src="https://like-it.link/02253/filament-spol-stand-5.jpg"><br><br></div><div><div><font size="2">The…
