Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
##Angry Guard Cat
This is an easy-to-print flat model of an angry cat that you can put in your window to guard your house. There are two versions included: one with paws and one with the head only.
I printed mine using Amazon Basics Black PLA filament with 0.2 mm layer height, 0.4 mm bottom thickness, 0.6 mm top thickness, and 15% zig zag infill. The filament is dark enough that you can't see the infill pattern with those settings.
###Related Model
I also have a similar model that you might be interested in: the [Peeking Cat](https://www.thingiverse.com/thing:3363234) model. 
###Remix Details
I liked Cole-zombie's Cat Guard, but I needed it without pegs so that I could put it in a window and his model looked too friendly to be an effective cat guard, so I removed the pegs and made some new eyes to make him look angry. I also wanted one in my door window and there wasn't room for the paws so I created a version with the head only.
----
###<img alt="Lyl3's Designs" title="Lyl3's Designs" src="https://cdn.thingiverse.com/renders/8c/4e/40/d7/ce/771666aad442acd92ec0f917fa01d022_thumb_tiny.jpg">Some of My Designs
Click an image below (opens in a new tab) or <a rel="nofollow" target="_blank" href="/Lyl3/designs">go to my designs page and see them all.</a>
If you see some thing that you like <img…
