Pipe Fittings Collection 2
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a collection of pipe fittings that may be used to create realistic pipework. The fittings have a 5mm outside diameter and may be scaled to suit your requirements. If required, you may mirror the Sewer Elbow and Sewer Tee (all other models are symmetrical). For my 1-in-20 models, I printed these at 200% scale.
See also my Pipe Fittings Collection 1: https://www.thingiverse.com/thing:5356308
Design Parameters:
1. Pipe OD = 5.0mm
2. Pipe ID = 3.4mm
3. Wall thickness = 0.8mm
You could use them as downpipes, drains and sewer pipes. You may use the pipes to hide low voltage wiring in your diorama or tabletop game. At a larger scale you could use these for character access passages.
Suggested paint finishes are: terracotta colour for clay pipes, concrete colour for drains, wall colour for downpipes.
Print using either a filament or resin printer (preferred). When generating supports in your slicer, raise the items a few millimetres above the print surface. Use a function similar to “Touch Platform Only” or “Platform” to avoid generating supports inside the fittings.
If using a resin printer, print pipes so that they are vertical. You should be able to fit a few on the build platform. This should also give better print quality.
2024-01-10 - Add: Corner Connector
2025-09-14 - Add: Cross 5 , Cross 6, End Cap
