![Dragon Pencil Cup [Cura 5.4 Tree Support]](https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/04/95/a1/51/a4/90338456-01b0-4837-bacc-4e2791d33899.png&w=1024&h=1024&fit=contain&cbg=white&n=-1)
Dragon Pencil Cup [Cura 5.4 Tree Support]
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
The Improved tree supports now use less material and print faster, making them easier to remove and resulting in a cleaner final print. Also a big shout out to community member @ThomasRahm who originally proposed and created these new improvements.
You can use this model to test the newly introduced settings:
>> Maximum Branch Angle
>> Trunk Diameter
>> Branch Diameter
>> Branch Diameter Angle
>> Preferred Branch Angle
>> Diameter Increase to Model
>> Minimum Height to Model
>> Initial Layer Diameter
>> Branch Density
>> Tip Diameter
>> Limit Branch Reach
>> Optimal Branch Range
>> Rest Preference
Are you curious to try it for yourself?
[Download UltiMaker Cura 5.4 here.](https://github.com/Ultimaker/Cura/releases)
Do you have some feedback for Cura?
[Leave a request on our GitHub.](https://github.com/Ultimaker/Cura/issues)
The model has been designed by [Puru Maz](https://www.thingiverse.com/purumaz/designs) or [(@purumaz)](https://www.fiverr.com/purumaz), to demonstrate the new Tree Support.
| Cura Setting | Value |
|------------------------------|---------------------|
| Generate Support | ✅ |
| Support Structure | Tree |
| Maximum Branch Angle | > 40 ° |
| Branch Diameter | 5 mm |
| Trunk Diameter | 25 mm |
| Branch Diameter Angle | 7 ° |
| Support…
