Octopus Stand Version Three
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Version three of the Octopus tablet stand. This one was designed to fit the iPhone 6/6 Plus, iPad Air and a slew of Android devices. There should be just enough room for a case with most devices. I recommend adding a little bit of sticky adhesive to the bottom to keep it nice and secure.
**I've uploaded a slightly earlier version of the design. It has bit tighter of an opening and slightly more height to it if you find your device is wobbly.**
*Note: the Moto X 2014 is pretty wobbly in it and I would not recommend it at this time.*
I've printed a copy of this out at Shapeways myself, as I am absent a 3D Printer :( You can find it here if you're in the same boat as I.
http://shpws.me/wIBN
