Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I fixed some manifold issues and widened it a bit and found the bowl to be too flat in the back. The bowl is sort of triangular so I pulled the back out to make it more oval. The westers47 remix was widened on the bed and printed (silver) and then deformed in blender to open the bowl cavity (white). I also pushed up the pallet because I wanted it to be less flat on the bottom. There is a slight lift to part of the flat bottom but it's not significant enough for me to mind, but it currently prints with a triangle of support in a thin layer (see bottom pic) making the bottom not uniform. These are ABS printed at 0.20mm.
See: https://www.thingiverse.com/thing:6193274 for original two part eyeballs that fit!
Update for Halloween 2024! I added a flat cut version and included the 3mf file for that. The flat cut fixes the rear skull surface being slightly uneven which is not necessary for printing but some people would rather have it perfectly flat.
