Ender-3 V3 SE filament guide
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This filament guide is suitable for the Ender-3 V3 SE and can be installed in place of the spool mount on top of the frame. Make sure to print the right files that match the outer diameter of your PTFE tube.
----
#### **Updates:**
- 10-9-2023 - Initial release
- 10-9-2023 - I just printed this thing and cannot guarantee its longevity
- 20-10-2023 - I have been using this filament guide for over a month now and it still works perfectly fine.
- 20-10-2023 - Added files for 6.5 mm OD PTFE tubes as per request
----
#### **Key features:**
- Easy to mount
- Pre-positioned prints
- No supports necessary
- Compact design
- Integrated hinge
- Reverse bowden capability
- Center mounted
----
#### **Note:**
- I might improve the model later on, but it is functional for now (currently added a second set of files to match a 6.5mm PTFE tube
- If you want something edited or some tolerances seem to be off, just let me know and I'll adjust the design
----
#### **What you will need:**
- PTFE tube (4mm or 6.5mm outer diameter, around 250mm in length)
- Separate spool holder (I use a filament dryer, but any (printed) external holder will suffice)
Pick one of the following combinations that matches your tube diameter:
- 4mm outer diameter
- Filament_Guide_bracket (printed part, compatible with 4mm PTFE tube)
- Filament_Guide_mount (printed part, compatible with 4mm PTFE tube)
- 6.5mm outer diameter
- Filament_Guide_Bracket_6.5_mm_OD_Tube.STL (printed part, compatible with 4mm PTFE…
