Super easy customizer for creating bolts, nuts, washers, threaded rods, and standoffs.
Features:
- easier than other thread customizers, just pick a thread and configure details
- [950 threads](https://gist.github.com/jbruce12000/24565ca20c765bd26c7971655129ab01)
- five types of bolt heads : standard, cheese, countersunk, round, knurled
- three types of slots in bolt heads: straight, hex, or phillips
- seven types of nuts: standard, wing, cap, flange, knurled, knob, knurled cap
- one washer
- threaded rods
- standoffs
- supports bolt heads, nuts, threaded rods and standoffs with as many sides as you want
- supports hollow bolts, threaded rods, and standoffs (to save plastic).
- uses [threadlib](https://github.com/adrianschlatter/threadlib) for smooth, functional threads that print well
- written with openscad, highly customizable
Instructions
1. start customizer
2. pick a thread from the list
3. select to show a bolt, nut, washer, threaded rod, or standoff
4. change settings for that object (lengths, types, etc)
5. print
Note that the **Overall** settings in the top tab apply to every object. This way you can create a bolt of a specific thread size, save that, and then switch over to creating a matching nut. You can also do things like substitute similar threads [maybe with a differing thread pitch] just by changing the **Overall -> thread** setting. The same is true of **Overall -> sides**... it applies to lots of objects like bolt heads, nuts,…
