Self Watering Pot
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A self watering pot in a space-efficient, awesome square shape.
<strong>120x120x150mm / (4.7x4.7x5.9'') external.
and
120x120x100mm (4.7x4.7x3.9'') external.</strong>
Scaling it down will work, since wall thicknesses are 2mm - Upper, 2.5mm - Lower.
Just be sure that it has at least two perimeters.
A few suggestions:
1. Don't use PLA if you gonna use it anywhere near direct sunlight;
2. Use either "random" or aligned seam alignment for a higher chance of water-tightness, as well as 101-104% flow.
3. Printing orientation just like on the pictures and in the stls. Z up.
<p>Step file attached. Stls are lame.</p>
<p>Feel free to comment. Any criticism is welcome.
By now comment section has also become FAQ of sorts. So you may find something useful there.
And if you need something like this made or rendered for you, find me on <strong><a rel="ugc nofollow" href="https://www.upwork.com/freelancers/emptinessbetweenthestars">Upwork</a></strong></p>
