crown cork bottle opener/cap
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
crown cork cap with opener
revised version with slits to prevent the cap from tearing after prolonged use. this also makes easier to push it onto the bottle.
2nd version is for rubber seal M10x20x2mm. found here: https://aliexpress.com/item/1005005837896564.html
or print yourself (seal_10x20x2.stl)
please note that the cap do not seal 100% (the ones with rubber seal a little better) but that's not what it's for, it's to protect against insects and to identify who owns which bottle. print it in different colors or with light filament and mark it with a pen.
the parts are optimized for 0.2mm layer height and printable without support.
the part was designed for PLA (plus, HS) and works well with it. other materials are of course also possible (ABS, PETG etc.)
to get the necessary stability, it is recommended to print with 3-4 wall lines or 100% infill.
if the lid does not click into place after being pushed on (see video), then scale the file in the slicer slightly larger (0.5 - 1%).
https://youtu.be/4nML_d-QOi8
