*Updates*
**07-12-2017** : long time after, here are the new plates that was used in production at the end. The new source is in onshape : https://cad.onshape.com/documents/086229ea796640d29acd68ff/w/2030a3358fd641da896d20a5/e/1e4ef00263ee4eae9316731a
**06-08:** : plates stl was not manifold in slic3r. Now they have been repaired in netfabb basic. it works everywhere.
**06-06:** : add some accessories like ramps support . Support for endstopY and some little debugs. It's going more and more clean now to assemble. Thank you to all from the community for feedback.
**05-28: version 1.2.2"** : some debug of 1,2 + new places for endstop X/Y . X goes under head , so cable can go with the head cables , Y goes on the right wall, fixed. no more danging cables for endstops.
**04-10: little update** . was alignment problem between Yslides and XYbearings
**04-09 : Version 1.2** : Big changes everywhere but extruder :
-> bearingsXY : now fix on the side ,more easy to build and far more solid on the Y rod ( it was breaking too easy)
-> Head : new one piece part , was problem with assembly. when you fix, parts are not aligned and bearings become hard. was not stable enough
-> new inductive support : more solid and lower
-> new slideY : far more solid, Xrods are further away , we have now an iso assembly (allmost)
-> new Zslide : more solid, bigger, we fix the plank with 4 wood screws . no need to counterdrill anymore.
**03-13** : new plate 2 : Ztop…
