Under Desk Bin / Can
by GodardScientific · from Thingiverse
Personal use only
♥ 3,872 likes
↓ 4,144 downloads
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Unprinted, untested model. Godspeed.
BOM:
PETG/ABS/ASA/PC or I guess PLA but its not designed for that type of plastic an might be too delicate and too much friction.
4x M3 x 8mm or M3 x 10mm socket head screws
6x M3 x 6mm socket head screws
6x screws that can go into the bottom of your desk and not poke out the top, minimum thread length of 10mm, recommend 12+
1 ton of plastic
1 ton of patience
1 good head on your shoulders to figure out how to do the supports :)
https://youtu.be/tRCVaWv1QjQ
Patreon: https://www.patreon.com/GodardScientific
Buy me a coffee: https://www.buymeacoffee.com/godsci
