Drip Irrigation System - Rain Bird (R) / Gardena Microdrip (R) Compatible
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Spring is here and before the days become really hot we recently started restoring our irrigation systems. We use sprinklers for watering the lawn but for vegetables, flowers, pots etc. we use a drip irrigation system, which, simply because it is a little more fragile, needs replacement parts and extensions on a pretty regular basis.
Before starting the main thing you need is <a href="https://amzn.to/3UJNcza"><b>drip irrigation tubing</b></a> (which unfortunately cannot be printed - then again...), and remember you will need lots of this. Pretty much everything else can be printed.
So here is a full set of <b>connectors/adapters/drippers</b> for connecting
- Hose to hose
- Hose (14 mm) to drip system
- Hose to faucet
- Hose Garden (R) compatible plugs
- Pegs for the tubing
The set contains:
- Pegs for fixing 1/4 inch tube
- 14 mm irrigation tube to 1/4 inch T-connector
- Gardena (R) compatibel plug to 1/4 inch tube (incl. gasket)
- Faucet to 1/4 inch tube (incl. gasket)
- T- connector for 1/4 inch
- Straight connector for 1/4 inch
- Y-connector for 1/4 inch
- Dripper (terminal), intensity 1-3
- Dripper intensity 1-3
The drippers come in 2 varieties (middle and terminal) and in 3 sizes (well they are all the same size but...). No 1 is always the one that will emit the smallest amount of water, 3 the one that emits the most. Try this with your own prints to see which one suits you the most. Both connectors come with the corresponding gaskets.
FILAMENT. Remember, this…
