GUN - Gravity Utility Knife V1.1

Inspired by the Reate Exo-U i did my own attempt on a grivity knife.
This might be work in progress, so possible that there will be further versions.
My original Design is for use with M2x2 heat inserts, but i also added a version for M2 nuts (untested)
Prints without any support.
For the stopper of the bladeholder its possible to use a M2x4 heat insert instead of 2x M2x2.
All holes facing the buildplate but don`t touch it having a 0.2mm layer to bridge the hole before printing on it. These has to be drilled/cut out afterwards.
Handle parts printing upright. Inner handle facing bottom to buildplate, outer handle facing top to buildplate.
Recommended to print with strong material. Printed mine with PETG-CF.
Use at your own risk! I'm not responsible if you hurt yourself with this.

STEP included, feel free to remix.

Update 1: Added the file "GUN-PrintOrientation.3mf" where i placed all objects like i printed them without support.

Update V1.1:
Added some BladeCover and also a BladeHolder with a longer cutting edge.

### BOM:
1. Heat Insert Version:
* 6x (7x with V1.1 Parts) M2x2(L)x3(OD) or 4x/5x M2(L)x2(OD) + 1x M2x4(L)x4(OD) Heat Inserts like this one: https://de.aliexpress.com/item/1005006071488810.html
* 1x M2x14 Screw
* 3x M2x5 or M2x4 Screw
* 2x M2x3 Cylinder Head Screw

2. Nut Version:
* 5x (6x for V1.1 Parts) M2 Nut
* 1x M2x14 Screw
* 1x M2x12 Screw
* 1x M2x5 or M2x4 Screw
* 2x M2x3 Cylinder Head Screw…